background image

31

®

Under no circumstances shall the retailer, MAXIMUM Canada, or manufacturer 
be liable to the purchaser for any claim for (a) indirect, special, punitive, 
incidental, exemplary, or consequential damages, (b) compensation for loss of 
profits, anticipated revenue, savings or goodwill, or other economic loss of the 
purchaser, (c) exemplary, aggravated or punitive damages howsoever incurred, 
(d) contribution or set-off in respect of any claims against the purchaser, (e) 
any damages whatsoever relating to third party products or services or the 
purchaser’s materials, or (f) any damages whatsoever relating to interruption, 
delays, errors or omissions; in each case under any theory of law or equity, 
arising out of or in any way related to this warranty, even if advised of the 
possibility thereof. Notwithstanding any provision herein or entitlement of 
the purchaser at law, in equity or otherwise, in no event shall the liability of 
the retailer or manufacturer under this warranty, whether in contract, tort, 
product liability or otherwise, exceed, in the aggregate, the amount paid by the 
purchaser to the retailer for the product to which this warranty applies.

*Notice to Consumer

This warranty gives you specific legal rights, and you may have other rights, which 
may vary from province to province. The provisions contained in this warranty are 
not intended to limit, modify, take away from, disclaim or exclude any statutory 
warranties set forth in any applicable provincial or federal legislation.

In addition to the 5-Year Limited Warranty, this MAXIMUM product is covered by our: 

1-Year Repair Warranty 

MAXIMUM Canada will maintain this product and replace critical parts which 
have worn beyond reasonable use through normal use of such product, any time 
during the first year after purchase. 

The following are excluded from this 1-Year Repair Warranty:

a)  missing or damaged parts or components that are a result of abuse or 

misuse;

b)  any wear and tear to non-critical parts or accessories that do not affect the 

core function of the product.

90-Day Satisfaction Guarantee

If you are not completely satisfied with the performance of your MAXIMUM 
product for any reason, you can return it within 90 days from the date of 
purchase with proof of purchase for exchange or a full refund. 

Made in China

Imported by

MAXIMUM Canada Toronto, Canada M4S 2B8

W

ARR

ANTY

Содержание 054-2433-0

































Отзывы: