maximatecc CCpilot VI, Техническое руководство

Страница: 4 / 20

www.maximatecc.com
1.2 Conventions and definitions
The following definition is used to separate unit specific details. The observe symbol is also used to
highlight such difference.
Defines Use
CCpilot VI Information that is specific for CCpilot VI
VI or VI device Information that applies to CCpilot VI
The observe symbol is used to highligt information in this document.
The exclamation symbol is used to highlight important information.
Text formats used in this document.
Format Use
Italics Paths, filenames, definitions.
Bold Command names and important information
1.3 Identification
On the backside of the VI device there is a label containing version and serial numbers which
identify your unique device. Take note of them. During service and other contact with the supplier
it is important to be able to provide these numbers.
1.4 Care

During welding or other service on the machine, all cables to the VI device shall be
disconnected.

Serviced shall only be made by authorised personnel. If the unit is opened by unauthorised
personnel, the guarantee will cease to be valid.

Scratches, or in the worst case damages, to the display occur easily if it comes in contact
with a sharp edge or hard material. In order to increase the longevity of the screen, this is
naturally something which should be avoided.

The Flash memory used for storage is durable; however as with all flash memory types the
write cycles are limited. Avoid unnecessary writing to the flash memory.

If the unit becomes too hot it will operate at a limited speed and can also be damaged.
Therefore, do not cover the unit by covering it, for example hanging a jacket or other
clothes on it.

Consider traffic safety when CCpilot VI is installed and whenever it is used. maximatecc
does not recommend that CCpilot VI or its accessories be used actively by the driver when
a risk of injury to people, or damage to property, is present.

Be advised that the VI device draws power from the vehicle battery. This can result in the
inability of the vehicle to start if the on-board computer has been on for a period of time
without the vehicle engine running.