maximatecc CCpilot VI, Техническое руководство

Страница: 12 / 20

www.maximatecc.com
Connectors
All connectors are accessible from the rear of the unit. The connectors are marked with a 1(J1) and
a 2(J2).
Use caution and avoid plugging/unplugging of connectors when the display is on.
Always replace a damaged cable. If the pins become bent or damaged they may not function
correctly, or in the worst case, the on-board computer or other equipment may be damaged.
Connector layout
Notice that the connector descriptions are those which are located on the unit, not those that the
attached cables shall have in order to mate with them.
J1 Connector
Pin # Default signal Comments 12-pin Deutsch
DTM Series Key A
1 +12/24 VDC Main Power Input
2 GND Main Ground Input
3 Switched Power +12/24 VDC Iginition Input
4 Switched Output 1
5 Switched Output 2
6
7
8
9
10
11
12 CAN 1 Shield
CAN 1+
CAN 1-
USB Ground
USB Data –
USB Data+
USB VBus
USB Power Out
J2 Connector
Pin # Default signal Comments 12-pin Deutsch
DTM Series Key B
1 Configurable Input 1
2 Configurable Input 2
3 Configurable Input 3
4 Configurable Input 4
5 Analog Ground
6
7
8
9
10
11
12
CAN 2 Shield
CAN 2+
CAN 2-
Not Used
Not Used
Not Used
Not Used