Operation instructions
8
I FEEL
HI
h
LOW
5
SWING
ON/OFF
TEMP
SLEEP
FAN
MODE
SET
TIMER
HEATER
Do not turn the air vanes manually, or malfunction may occur. If that happens, turn off
the unit first and cut off the power supply, then restore power supply again.
Dew may be form and drip from air inlet when the unit operates at COOLING or DRY mode in
a high-humidity condition (higher than 85%).
After the unit has been used for a long time, the air inlet may be covered with dust, just wipe it
off with a soft cloth.
It is better not to allow the air vanes tilt downward for a long time at COOLING or DRY operation
mode to prevent dew from forming and dripping down.
5
Vertical airflow control
Press the
SWING
button of the remote controller to control
the swinging and stopping of air vanes.
Swinging airflow:
Fixed airflow:
Press the SWING button once, the
fan motor starts to operate, and the
air vanes swing vertically.
Press the SWING button when the
airflow reach your desired direction,
the fan motor stops operating, and
the air vanes stop swinging too.
(desired direction)
(desired direction)
Airflow direction control
