Installation instructions
24
Electrical work steps:
1. Remove the electrical box covers from indoor and outdoor unit.
2. Connect the power connecting cord and the control cable. Fix them effectively with a cable clamp
after connecting.
3. Must do indoor and outdoor unit ground connection. If a ground is incorrect, it may cause an electric shock.
4. After electrical connection, reassemble the removed parts.
Do not change the internal wiring optionally.
Make sure to fix the wires well. Incomplete connection or fixing of wire could result in a fire.
Power supply cord
Electric heater power cord
Defrost cable
Terminal
Control board
Control box cover
Electrical box cover
Outdoor electrical box
Electrical box cover
Electrical Wiring Diagram
Power
supply
Main switch/fuse
(prepared by user)
Main switch/fuse
(prepared by user)
Control cable
Power cable
(has polarity)
Power Supply
Outdoor
unit
Indoor
unit
The electric technician should cut proper length of cables and cords as desired, and should connect
local electrical and fire control rules.
INDOOR UNIT
OUTDOOR UNIT
