28
Buckle the front panel to the main unit, pay attention to
the correct direction of front panel. Two of the buckles hook inside,
the other two hook outside.
Installation instructions
Connect the three connectors of front panel to the main unit, allowing
two fan motors and remote control indicating board on the front panel
connect to the control PCB of main unit.
As the right figure shown, lift the front panel by turning
the screws of the 4 corners, until it adhere to the ceiling
board tightly. Restrict the sponge between the front panel
and indoor unit to 5-8mm, allowing each side of the unit fits
well with the front panel to avoid airflow leaks from the gap.
Adjust the tightness between the front panel and the main unit
by turning the screws clockwise or anti-clockwise.
If necessary, as the left figure shown, use a special wrench to adjust
the highness and levelness of the indoor unit, ensure that the main
unit and front panel, the front panel and ceiling board fits well.
Reinstall the air inlet grill and 4 corner panels back to the front panel.
Front panel
Main unit
