31
32
2.
Route the Connector
without the Adjuster
Closest to it Through
the Rear-Facing Belt Path
As Shown
3.
Reach Under Pad and
Pull Connector Across
to Opposite Side
Do not twist belt.
Belt
MUST
be in
front
of buckle
strap and under pad.
You
MUST
use the 1st or 2nd
buckle slot.
1
2
5.
Finished Lower Anchor Belt
Routing
4.
You
MUST
Thread the
Lower Anchor Belt into
Belt Positioning Guides
on Both Sides of Shell As
Shown
continued on next page
Lower Anchor Belt Installation
1.
Remove Lower Anchor
Belt from Storage
Location
Or if the lower anchor belt was
used forward facing
, pull it out of
the forward-facing belt path so both
connectors are on the same side of
the seat as shown.
WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt.
Check the lower anchor belt before each use. Use only if
the belt can be tightened properly and securely.
Do not fasten multiple lower anchor connectors on the
same lower anchor bar in the vehicle.
Store the tether hook when used rear
facing. Attach the tether hook to
storage attachment as shown.
Failure to follow these warnings can
result in serious injury or death.
6.
Fully Recline the Child
Restraint
Pull out on recline handle and push
top of child restraint back.
