WARNINGS:
Do not use child restraint without the seat
pad. Failure to do this can result in serious injury or death.
Cleaning Pad and Accessories
Machine wash separately with cold water on a gentle cycle.
Make sure harness covers are closed so fastening strips are not
exposed. Do not use bleach. Tumble dry separately for 10-12
minutes on low heat. Remove immediately.
Cleaning Easy Out Buckle Cover
Machine wash separately with cold water on a gentle cycle and
air dry.
Cleaning Harness Strap
Spot clean using warm sudsy water and damp cloth.
Installing Seat Pad
See pages 16-18.
16
6.
Undo Fasteners on Seat Pad
8.
Remove Seat Pad
Gently pull the pad off the outside
edges of the shell then around the
headrest and harness holders.
Pull buckle and buckle pad through
slot in seat pad.
7.
Lower Headrest to Lowest
Position
PUSH
1.
Slip Seat Pad Over and
Behind Headrest
Lay pad in child restraint and slip pad
over and behind the headrest.
Gently slide harness holders through
slots in pad.
Pull buckle through slot in pad.
2.
Pull Harness Adjustment
Strap Through Slot in Pad
3.
Pull Pad Over the Outside
Edges of the Shell
Installing Seat Pad
4.
Attach Fasteners on Seat
Pad
PUSH
15
continued on next page