17
18
If you have removed the harness straps from the splitter plate
and the buckle tongues and chest clip have been unthreaded
from the harness straps, follow the steps below to rethread them.
1.
Thread Buckle and
Chest Clip
Harness strap ends go through
the
back
of buckle tongues and
through the chest clip
front to
back
as shown.
6.
Starting At Bottom of
Headrest, Pull Headrest
Pad onto Lower Portion
of Headrest then Pull
Headrest Pad Up Gently
Over the Airbags and Upper
Portion of Headrest
PUSH
7.
Attach Fasteners on
Headrest Pad
2.
Thread Harness Straps into
Shoulder Harness Slots
sewn
end
3.
Attach Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap
loops
MUST
face towards you.
DO NOT
twist harness strap or
harness adjustment strap.
Make sure the harness strap loops
are fitted
COMPLETELY ON
both
sides of the splitter plate.
Correct
WARNINGS:
Harness system must be installed
correctly. Failure to follow these steps can result in
serious injury or death.
5.
Adjust the Headrest
to the Highest Position