19
20
Accessories on Select Models
Soft Infant-Positioning Wedge
To remove soft infant-positioning wedge,
undo the buckle and slide wedge from
behind the harness straps.
The soft infant-positioning wedge
MUST
be used for infants who weigh
5-11 lb (2.3-4.9 kg).
You
MUST
remove the soft infant-
positioning wedge for children who
weigh 15 lb (6.8 kg) or more.
Body Pillow
Remove the body pillow when using
the child restraint forward-facing.
To remove body pillow
, loosen harness
straps and
slide pillow out from behind
the harness straps.
To install body pillow
, slide pillow be-
hind infant-positioning wedge and
harness straps.
Easy Out Buckle Cover
To remove buckle cover
, follow page 7
steps 1-5 to remove the buckle. Then pull
the buckle up and out of the cover.
Replace the buckle.
To install buckle cover,
see page 8.
Harness Covers
Harness covers help provide comfort to
the neck. If harness covers will not allow
proper positioning of the chest clip or
interfere with getting a tight enough fi t for
a smaller baby, remove and do not use.
Store until child is large enough to use
these harness covers while maintaining a
properly fi tting harness.
To remove harness covers
, pull the
fastening strips apart and remove
harness covers.
Harness Covers for Larger
Children
These harness covers are located in the
pocket on side of pad.
Only use these harness covers if your
child weighs more than
65 lb
(29 kg)
AND
there is
NOT
a vehicle tether anchor
available.
Undo the fastening strip and put the
harness strap inside of harness cover.
