WARNING:
Avoid serious injury or death to your child. Never
use your KeyFit 35 Child Restraint without the softgoods in place.
You must read and understand the Softgood Removal instructions
and the instructions in the User Guide. If you do not understand
these instructions, DO NOT attempt to remove the softgoods,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
KeyFit 35 Softgood Removal
IMPORTANT: Please also refer to the instructions that came with your product.
Rotate the Carry Handle up into the carry position.
To remove the Canopy, unhook the Elastic Straps on both sides,
below the Carry Handle hub. Undo both Toggles on the back of the Child Restraint. On one side of the Canopy, press the
button on the Canopy Mount and pull out the bow. Repeat for the other side of the Canopy and remove. Then rotate the
Carry Handle back into stationary position.
Refer to User Guide if needed.
1
Press the Harness Adjuster Button
and loosen the
Harness Straps. Undo the buckle and chest clips.
2
Remove the optional Head Rest Insert and Newborn
Positioner.
Refer to User Guide if needed.
4
Remove the Crotch Strap Pad
by pushing the fabric Tab
through the slot on the BACK of the Harness Buckle. Then
pull Tab out of the FRONT and remove Crotch Strap Pad.
IMPORTANT! If Crotch Strap Pad prevents harness from properly
fitting small Infant, it should be removed.
3
1
SS0030E_01
PMS 2747 and PMS 186
Remove both Shoulder Pads.
Undo the hook and loop
sections located on the outside seam of the Shoulder Pad.
5
