MATTHIESEN Magic Finger Bagger, Руководство пользователя

Страница: 41 / 85

Section 1
General Information
General Information 1-3 MN605
Safety Notice Continued
WARNING: UL listed motors must only be serviced by authorized Baldor
Service Centers if these motors are to be returned to a flammable
and/or explosive atmosphere.
WARNING: Thermostat contacts automatically reset when the motor has
slightly cooled down. To prevent injury or damage, the control
circuit should be designed so that automatic starting of the motor
is not possible when the thermostat resets.
Caution: To prevent premature equipment failure or damage, only qualified
maintenance personnel should perform maintenance.
Caution: Do not lift the motor and its driven load by the motor lifting
hardware. The motor lifting hardware is adequate for lifting only the
motor. Disconnect the load from the motor shaft before moving the
motor.
Caution: If eye bolts are used for lifting a motor, be sure they are securely
tightened. The lifting direction should not exceed a 20
°
angle from
the shank of the eye bolt or lifting lug. Excessive lifting angles can
cause damage.
Caution: To prevent equipment damage, be sure that the electrical service is
not capable of delivering more than the maximum motor rated amps
listed on the rating plate.
Caution: If a HI POT test (High Potential Insulation test) must be performed,
follow the precautions and procedure in NEMA MG 1 and MG 2
standards to avoid equipment damage.
If you have any questions or are uncertain about any statement or procedure, or if you
require additional information please contact your Baldor distributor or an Authorized
Baldor Service Center.
41