MATSONIC MS7057C, Руководство пользователя

Страница: 62 / 78

56
Soft-Off by PWR-BTTN Default: Instant-Off
Under ACPI (Advanced Configuration and Power management Inter-
face) you can create a software power down. In a software power down,
the system can be resumed by Wake Up Alarms. This item lets you in-
stall a software power down that is controlled by the normal power
button on your system. If the item is set to Instant-Off, then the power
button causes a software power down. If the item is set to Delay 4 Sec.
then you have to hold the power button down for four seconds to cause
a software power down.
Wake-Up by PCI card Default: Disabled
When this item is enabled, the system power will be turned on if there is
any PCI card activity.
Power On by Ring Default: Disabled
If this item is enabled, it allows the system to resume from a software
power down or a power-saving mode whenever there is an incoming
call to an installed fax/modem. You have to connect the fax/modem to a
mainboard Wake On Modem connector for this feature to work.
Wake Up On LAN Default: Enabled
When set to Enabled, the system power will be turned on if the LAN
port receives an incoming signal. You have to connect the fax/modem
to a mainboard Wake On LAN connector for this feature to work.
USB KB Wake-Up From S3 Default: Disabled
If you are using a USB keyboard, and the ACPI suspend type is set to
S3, you can enable this item to allow a keystroke to wake up the sys-
tem from power saving mode.
Resume by Alarm Default: Disabled
When set to Enabled, you may set the date (day of the month), hour,
minute and second to turn on your system. When set to set 0 (zero) for
the day of the month, the alarm will power on your system every day at
the specified time.
Date (of Month) Alarm Default: 0
When Resume by Alarm is enabled, you can set the date you wish the
computer to turn on.