MATSONIC MS7057C, Руководство пользователя

Страница: 61 / 78

55
Power Management Default: User Define
This item acts like a master switch for the power-saving modes and
hard disk timeouts. If this item is set to Max Saving, power-saving
modes occur after a short timeout. If this item is set to Min Saving,
power-saving modes occur after a longer timeout. If the item is set to
User Define, you can insert your own timeouts for the power-saving
modes.
Video Off Method Default: DPMS
This item defines how the video is powered down to save power. This
item is set to DPMS (Display Power Management Signaling) by default.
Video Off In Suspend Default: Yes
This option defines if the video is powered down when the system is put
into suspend mode.
Suspend Type Default: Stop Grant
If this item is set to the default Stop Grant, the CPU will go into Idle
Mode during power saving mode.
MODEM Use IRQ Default: 3
If you want an incoming call on a modem to automatically resume the
system from a power-saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You have to connect the
fax/modem to a mainboard Wake On Modem connector for this feature
to work.
Suspend Mode Default: Disabled
If you have selected User Define for the Power Management item, you
can set this item to a timeout from 1 Min to 1 Hour. The system will go
into power saving suspend mode if the timeout passes without any
system activity.
HDD Power Down Default: Disabled
If you have selected User Define for the Power Management item, you
can set this item to a selection of timeouts from 1 to 15 minutes. The
hard disk drive will power down if the selected timeout passes without
any activity on the hard disk.