MATSONIC MS7057C, Руководство пользователя, Страница: 37 / 78

31
SIR1: Serial Infrared Connector.
Connect the cable from the optional IR port to SIR1 (for SIR in-
frared). After you have connected the cable, secure the optional
IR port to the appropriate location on your system case.
This option can be purchased from third-party vendors.
Note: An IR port may use some of the resources required by a
second serial port or a fax/modem card. If you have more than
one of these items installed, you may not be able to use them at
the same time. You can use the Peripherals page of the Setup
Utility to switch resources between an IR port and a second serial
port. See Chapter 3 for more information.
USB1: Extra USB Port Header
Some cases come with USB ports on the front panel. If your
case has these ports, you can connect them to the USB1 header.
WOL1: Wake on LAN
If you have installed a LAN/modem card, you can use the cable
provided with the card to plug into the WOL1 connector on the
mainboard. This is the Wake On LAN feature. When your sys-
tem is in a power–saving mode, any incoming calls to the LAN
automatically resume the system.
You must enable this item using the Power Management page
of the Setup Utility. See Chapter 3 for more information.
WOM1: Wake on Modem
If you have installed a fax/modem card, you can use the cable
provided with the card to plug into the WOM1 connector on the
mainboard. This is the Wake On Modem feature. When your
system is in a power–saving mode, any incoming calls to the
modem automatically resume the system.
You must enable this item using the Power Management page
of the Setup Utility. See Chapter 3 for more information.