MATSONIC MS7057C, Руководство пользователя

Страница: 59 / 78

53
SPP allows data output only. Extended Capabilities Port (ECP) and En-
hanced Parallel Port (EPP) are bi-directional modes, allowing both data
input and output. ECP and EPP modes are only supported with EPP
and ECP aware peripherals.
ECP Mode Use DMA Default: 3
When the onboard parallel port is set to ECP mode, the parallel port
has the option to use DMA 3 or DMA 1.
Game Port Address Default: 201
Enables you to specify the I/O address of the game port.
Midi Port Address Default: 330
Enables you to specify the I/O address of the MIDI port.
Midi Port IRQ Default: 10
Enables you to specify the IRQ of the MIDI port if installed.
Power Management Setup Option
This option displays items that let you control the system power
management. Modern operating systems take care of much of
the power management. This mainboard supports ACPI (ad-
vanced configuration and power interface). The system has
various power saving modes including powering down the hard
disk, turning off the video, suspending to RAM, and a software
power down that allows the system to be automatically resumed
by certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the
system is inactive for a time, the timeouts begin counting. If the
inactivity continues so that the timeout period elapses, the sys-
tem enters a power-saving mode. If any item in the list of Reload
Global Timer Events is Enabled, then any activity on that item
will reset the timeout counters to zero.