Matrox Rapixo CL Pro, Установка и справочник по оборудованию, Страница: 82 / 96

82 Appendix B: Technical information
The pinout for auxiliary I/O connector C is as follows for Matrox Rapixo CL
Pro SF and DF. It can be accessed through either a DB-15 or DB-9 connector
using one of the two adapter brackets
.
Pin on
DB-15 Pin on
DB-9 Hardware signal
name
MIL constant
for auxiliary
signal Digitizer
device
number for
auxiliary
signal
Description
1 1 RESERVED Reserved. Do not connect.
2 - RESERVED Reserved. Do not connect.
3 - TTL_AUX_IO_14 M_AUX_IO3 M_DEV0 TTL auxiliary signal (input/output), for acquisition path 0, which
supports: trigger input (trigger controller 3 on acq path 0), user
input, or user output (M_USER_BIT5 on M_DEV0).
4+,5- 8+,3- LVDS_AUX_IN10 M_AUX_IO4 M_DEV0 LVDS auxiliary signal (input), for acquisition path 0, which
supports: trigger input (trigger controller 2 on acq path 0) or user
input.
6+,8- - LVDS_AUX_IN11 M_AUX_IO5 M_DEV0 LVDS auxiliary signal (input), for acquisition path 0, which
supports: trigger input (trigger controller 3 on acq path 0) or user
input.
7 6 GND N/A N/A Ground.
10 - GND N/A N/A Ground.
12+,11- 4+,5- OPTO_AUX_IN9 M_AUX_IO1 M_DEV0 Opto-isolated auxiliary signal (input), for acquisition path 0,which
supports: trigger input (trigger controller 3 on acq path 0) or user
input.
13 - RESERVED Reserved. Do not connect.
14 7+,2- RESERVED Reserved. Do not connect.
15+,9- - OPTO_AUX_IN8 M_AUX_IO0 M_DEV0 Opto-isolated auxiliary signal (input), for acquisition path 0, which
supports: trigger input (trigger controller 2 on acq path 0) or user
input.
- 9 NC Not connected.