Matrox Rapixo CL Pro Скачать руководство пользователя страница 37

Страница: 37 / 96

Matrox Rapixo CL Pro acquisition 37

Supported video sources

The following video sources are supported when running in Base configuration:

In addition to the above video sources, the following video sources are supported
when running in Medium configuration:

In addition to the above video sources, the following video sources are supported
when running in Full configuration:

Video sources supported per acquisition path

Camera Link Standard

• One tap 8/10/12/14/16-bit.

• Two tap 8/10/12-bit.

• One tap 3 x 8-bit (RGB).

• Four tap 8-bit with time-multiplexing.

Not Camera Link Standard

• Two tap 14/16-bit with time-multiplexing.

• Four tap 10/12-bit with time-multiplexing.

Video sources supported

Camera Link Standard

• Four tap 8/10/12-bit.

• One tap 3 x 10/12-bit (RGB).

Not Camera Link Standard

• 8 tap 8-bit with time-multiplexing (using only 2 receivers).

• Two tap 14/16-bit.

• One tap 3 x 14/16-bit (RGB).

• Two tap 3 x 8-bit (RGB) (genlocked).

Video sources supported

Camera Link Standard

• Eight tap 8-bit.

Not Camera Link Standard

• Four tap 14-16-bit

Содержание Rapixo CL Pro

































































































Результаты поиска

Содержание Rapixo CL Pro

Отзывы:

Matrox Rapixo CL Pro, Установка и справочник по оборудованию, Страница: 37 / 96

Результаты поиска

Содержание Rapixo CL Pro

Отзывы: