Matrox Rapixo CL Pro, Установка и справочник по оборудованию, Страница: 57 / 96

Processing FPGA 57
Possible processing operations
To use the Processing FPGA, you must configure it with an FPGA configuration
that defines the appropriate functionality. An FPGA configuration is a code
segment that is used to program an FPGA.The following diagram shows the
configurable FPGA components in an FPGA configuration.
You would typically use standard Matrox FPGA configurations. You can also chose
to implement processing on your own, using the Matrox FPGA Developers
Toolkit (FDK) and C++. If required, Matrox’s FPGA design services can be
employed to develop an application-specific FPGA configuration.
Once the Processing FPGA is programmed, you can then make use of its
functionality using MIL. Refer to
Using MIL with a Processing FPGA chapter in
the MIL User Guide for more information
On-board
DDR4
SDRAM
A X I
Interconnect
Processing
units
DMA read
to stream
Stream to
DMA write
Host
Interface
Configurable components of an FPGA configuration
Memory
controller