Matrox Radient eCL-DF, Установка и справочник по оборудованию, Страница: 84 / 96

84 Appendix B: Technical information
The pinout for auxiliary I/O connector C is as follows for Matrox Radient eCL-SF
and eCL-DF
.
Pin Hardware signal
name
MIL constant
for auxiliary
signal *
Digitizer
device
number for
auxiliary
signal
Description
1 RESERVED Reserved. Do not connect.
2 RESERVED Reserved. Do not connect.
3 TTL_AUX_IO_14 M_AUX_IO3 M_DEV0 TTL auxiliary signal (input/output), for acquisition path 0, which
supports: trigger input (trigger controller 3 on acq path 0), user input, or
user output (M_USER_BIT5 on M_DEV0).
4+,5- LVDS_AUX_IN10 M_AUX_IO4 M_DEV0 LVDS auxiliary signal (input), for acquisition path 0, which supports:
trigger input (trigger controller 2 on acq path 0) or user input.
6+,8- LVDS_AUX_IN11 M_AUX_IO5 M_DEV0 LVDS auxiliary signal (input), for acquisition path 0, which supports:
trigger input (trigger controller 3 on acq path 0) or user input.
7 GND N/A N/A Ground.
10 GND N/A N/A Ground.
12+,11- OPTO_AUX_IN9 M_AUX_IO1 M_DEV0 Opto-isolated auxiliary signal (input), for acquisition path 0,which
supports: trigger input (trigger controller 3 on acq path 0) or user input.
13 RESERVED Reserved. Do not connect.
14 RESERVED Reserved. Do not connect.
15+,9- OPTO_AUX_IN8 M_AUX_IO0 M_DEV0 Opto-isolated auxiliary signal (input), for acquisition path 0, which
supports: trigger input (trigger controller 2 on acq path 0) or user input.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_HARDWARE_PORTn became rep-
resented by M_AUX_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL
versions and MIL 10, see
MILRadientCameraLinkIOConversionTable
within
MIL Release Notes
.