Matrox Radient eCL-DF, Установка и справочник по оборудованию, Страница: 70 / 96

70 Appendix B: Technical information
• Has one LVDS serial port (UART) per acquisition path.
• Supports an external 5 V rotary encoder with quadrature output per acquisition
path.
• Has four camera control signals (re-routing of specific auxiliary input signals,
HSYNC output, VSYNC output, clock output, timer output, or user output) per
acquisition path
*
.
• Has up to 32 auxiliary signals that can be path independent or path dependent,
depending on the functionality
†
selected
*
. When path dependent, there are:
- Three TTL auxiliary I/O signals (trigger input or user input, or timer output
or user output) per acquisition path.
- One LVDS auxiliary output signal (timer output or user output) per acquisition
path.
- Two LVDS auxiliary input signals (trigger input, timer-clock input, quadrature
input, or user input) per acquisition path.
- Two opto-isolated auxiliary input signals (trigger input or user input) per
acquisition path.
*. See the Camera control and auxiliary signals for Matrox Radient eCL-DB and eCL-QB
and Camera control and auxiliary signals for Matrox Radient eCL-SF and eCL-DF sec-
tions in Chapter 4: Matrox Radient eCL hardware reference chapter for supported func-
tionality.
†. For example, for Matrox Radient eCL-DB and eCL-QB, TTL_AUX_IO_14 can be
used as a trigger input when grabbing from acquisition path 0 or 1; however, you can
only route timer 2 of acquisition path 1 to this signal.