Matrox Radient eCL-DF, Установка и справочник по оборудованию, Страница: 75 / 96

Connectors on Matrox Radient eCL boards 75
Pin Hardware signal
name
MIL constant for
auxiliary signal *
Description
1 Inner shield Ground (inner shield), or +12V to camera in PoCL mode.
3+,16- CC3 M_CC_IO3 Camera control output 3 for acquisition path n, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEVn), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEVn), VSYNC, HSYNC,
clock output, or rerouting of specific auxiliary input signals † .
5+,18- CC1 M_CC_IO1 Camera control output 1 for acquisition path n, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEVn), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEVn), VSYNC, HSYNC,
clock output, or rerouting of specific auxiliary input signals † .
6+,19- SerTFG Serial port to frame grabber (UART).
8+,21- X3 Video input data X3.
9+,22- Xclk Clock input X.
10+,23- X2 Video input data X2.
11+,24- X1 Video input data X1.
12+,25- X0 Video input data X0.
13 Inner shield Ground.
14 Inner shield Ground.
15+,2- CC4 M_CC_IO4 Camera control output 4 for acquisition path n, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEVn), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEVn), VSYNC, HSYNC,
clock output, or rerouting of specific auxiliary input signals † .
17+,4- CC2 M_CC_IO2 Camera control output 2 for acquisition path n, which supports: timer output
(M_TIMER1/M_TIMER2 on M_DEVn), user output
(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEVn), VSYNC, HSYNC,
clock output, or rerouting of specific auxiliary input signals † .
20+,7- SerTC Serial port to video source (UART).
26 Inner shield Ground (inner shield), or +12V to camera in PoCL mode.
*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_CCn became represented by
M_CC_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL versions and
MIL 10, see
MILRadientCameraLinkIOConversionTable
within
MIL Release Notes
.
†. See the table in the
Camera control and auxiliary signals
section of
Chapter 4: Matrox Radient eCL hardware reference
for more information on
which auxiliary input signals (or auxiliary I/O signals set to input) can be rerouted onto the camera control output signals. Also note that for
Matrox Radient eCL-DB and eCL-QB, n should be replaced by the number of the Camera Link connector to which the video source is connected.