Matrox Radient eCL-DF, Установка и справочник по оборудованию, Страница: 69 / 96

Board summary 69
• Has a x8 PCIe GEN 1 Host interface.
• Can provide power over Camera Link (PoCL) with SafePower. The PoCL
protection on-board fuse can sustain a current of 0.4 A.
• Supports a maximum clock frequency of up to 85 MHz. Clock frequency is also
dependent on the length of the cable used. The following are rough guidelines for
the maximum clock frequencies that can be achieved; contact your cable
manufacturer for the actual maximum clock frequency that can be achieved for
your specific cable.
• Supports frame and line-scan video sources. The minimum and maximum
number of pixels per line are 16 and 65535, respectively.
• During data transfer to Host:
- Can convert captured or processed 8- or 16-bit monochrome or 24- or 48-bit
packed BGR data to monochrome, packed BGR, packed BGRa, planar RGB,
or YUV (YUYV) format.
- Supports line reversal and frame reversal during acquisition. Can only perform
frame reversal during data transfer to Host.
- Can crop (ROI capture) acquired data or subsample it by integer subsampling
factors of 1 to 16.
• Has 2 Gbytes of DDR2-667 SDRAM, which it uses as main on-board memory
(acquisition and processing). Total memory bandwidth of 10.6 Gbytes/sec.
• Optionally has 4 banks of QDR-II SRAM that total 16 or 32 Mbytes of memory,
which it uses as dedicated Processing FPGA memory. Total memory bandwidth
of up to 4.0 Gbytes/sec in each direction.
Maximum cable length (m)
Maximum clock frequency (MHz)
*
*. Achieved with high quality cables.
10 70
7 80
5 85