6
Matrox Parhelia Precision SGT – User Guide
3
Connect the stereo device
Connect your stereo device (for example,
your 3D glasses) to the stereo connector
(mini DIN, 3 pins) on your stereo-output
adapter.
4
Connect your standard
computer monitor (optional)
Connect your standard analog or digital
computer monitor to the main connector
(DVI) on the stereo-output adapter.
If your monitor has a DVI connector,
connect it directly to the main connector
(DVI) of your adapter.
If your monitor has an HD-15 connector,
use the DVI-to-HD15 adapter included with
your Matrox product to connect your
monitor to the main connector.
Make sure the connectors are firmly in place. Your Matrox card is now installed. Restart your
computer and install your Matrox software (
see “Software setup”, page 7
).
Note:
When connecting the BNC
connectors on your 3W3 cable to your
monitor, make sure the Green (
G
),
Horizontal Sync (
H
– gray wire), and
Vertical Sync (
V
– black wire) connections
are firmly in place and plugged into the
correct input.
Stereo
device
Monitor cable
(DVI)
DVI-to-HD15
adapter
Monitor cable
(HD-15)
Note:
To connect a digital monitor (a
monitor that uses digital input, usually a
flat panel monitor) to your Matrox
product, your monitor must have a DVI
connector.
Some monitors with DVI connectors
support both digital and analog input. If
you’re using one of these monitors with
your Matrox product, make sure it’s configured to use the correct type of input. For more
information, see your monitor documentation.
DVI connector
(digital)
HD-15 connector
(analog)
DVI connector
(analog/digital)
