Matrix T7X-01, Руководство по обслуживанию

Страница: 68 / 96

64
9.11 SPeed SeNSor rePlaCemeNT
CHaPTer 9: ParT rePlaCemeNT GUide
1) Turn off the power and disconnect the cord from the machine.
2) Remove the front shroud as outlined in Section 9.1.
3) Remove the speed sensor from the left side of the motor using a Phillips screwdriver (Figure A).
4) Cut the wire ties holding the speed sensor wire to the motor and MCB (Figures B & C).
5) Unplug the speed sensor from the MCB (Figure D).
6) Auto Calibration must ALWAYS be run after installation of a new speed sensor (see Section 3.5).
fiGUre a fiGUre b
fiGUre C fiGUre d