Matrix MyRide, Руководство по обслуживанию

Страница: 8 / 11

8
2.2 TROUBleSHOOTiNG - BlUe OR WHiTe SCReeN
MyRide TROUBleSHOOTiNG
SyMPTOM:
1) The monitor is stuck on a blue or white screen.
SOlUTiON:
1) The VGA cable (Figure A) is not connected properly or is damaged.
a. Verify the connection of the VGA cable at the monitor and mini PC. Check that all 4 cable screws are attached properly (Figure B).
b. Disconnect the VGA cable and check that all pins are straight and none of them are missing.
c. Replace the cable if any damage or bent pins are found.
d. Only send a monitor or mini PC after replacing the VGA cable and confirming that it is not the issue.
NOTE:
You can use any generic
VGA cable (like from a computer at the club) to test if this is the issue as VGA cables are all pinned out the same.
FiGURe A