13
12
6.1 USINg ENgINEERINg ModE
CHAPTER 6: ENgINEERINg ModE
7.1 USINg SERVICE ModE
CHAPTER 7: SERVICE ModE
To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.
Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.
CodE
dEfAUlT
oPTIoNS
dESCRIPTIoN
Disable Errors
No
Yes or No
No - Shows A-C class error codes. Yes - Shows only C class error codes.
Speed Units
Mile
Mile or Kilometer
Set for Mile or Kilometer.
Machine Type
C5x-04
C5x-01,C5x-02,
C5x-03,C5x-04
This option selects the current model.
Pause Time
30 Seconds
15 - 120 Seconds
For AC powered frames only. This option controls the length of a user's pause
time before reset.
Serial Number
N/A
N/A
Serial Number input is available for both the Console and Frame. Use the
number keys and UP / DOWN LEVEL keys to enter Engineering Mode. Due to
the limited LED characters, 2 layers are used to enter the serial number. First
Layer:
- PPPPP V
- PPPPP is the product name (CS24 for the Climb Mill).
- V is the version. If the version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08, 09, 10).
- nnnnn is the actual serial number.
Use the UP / DOWN LEVEL keys to navigate the layers and the number keys
to input the serial number. The product name is dependent on the Machine
Type setting.
For example, the console is CS19 with ver. A and the manufactured date is
2012.09 with 00123. The frame is CS24 with ver. A and the manufactured date
is 2014.06 with 99777. Their serial numbers are:
Console SN: CS19 1st layer, 120900123 2nd layer.
Frame SN: CS24 1st layer, 140699777 2nd layer.
Club ID
N/A
N/A
This sets the club ID for clubs using Asset Management.
Erp Time
Off
Off or On (1-30
Minutes)
If there is no use of the machine over a period of time, the console LEDs will
turn off (go into sleep mode).
E-Stop Switch
On
Off or On
This option selects the E-Stop function.
E-Stop Setting
100
4-500
Adjusts the touched point of the E-Stop.
Audio Source
Off
Off / TV / PCTV /
Remote TV
a. Off – no TV (keypad will not operate)
b. TV – All normal MYE TVs.
c. PCTV – All PCTVs (net based TV).
d. Remote TV – Wall mounted TVs with 900MHz receiver.
Volume Control
TV/ PCTV:
Output:13
1~ 32
Controls the default TV volume for entertainment wired through the C-Safe
port.
a. Input Default (DF : 15 / Range : 1 ~ 15)
b. Max Default (DF : 32 / Range : 1 ~ 32)
c. Output Default (DF : 13 / Range : 1 ~ Max)
Remote TV support a / b / c item. TV and PCTV only support c item.
Remote TV
Output:13
1~ Max
Remote TV
Input:15
1~ 15
Remote TV
Maximun:32
1~ 32
AM System
WIFI
WIFI/RF Radio
To select AM output device by WIFI or RF Radio.
To enter Service Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display. Press
the LEVEL UP or DOWN key to scroll to Service Mode. Press ENTER to go into Service Mode.
CodE
dEfAUlT
oPTIoNS
dESCRIPTIoN
Service 1
Display Test
Press the ENTER key repeatedly
to check each set of LEDs on the
display sequentially.
Service 2
Keypad Test
Press any key and the display
should show the corresponding
message.
Service 3
Distance / Time
Distance:
Mile 0 - 99999
Kilometer 0 - 160898
Time:
0 - 999999
Manually sets the Accumulated
Distance and Time.
Service 4
CSafe / RF Test
Press the ENTER key to test
CSAFE. Press the ENTER key
again to test the RF.
Service 5
Error Log
Shows the last 10 errors. Press
and LEVEL UP and DOWN for 3
seconds to clear the errors.
Service 6
Current Time Display
Displays the current time
Service 7
Export and Import Parameter
Export Parameter - Export the
engineer parameters to a USB
device (the file name will be
Premium C5x.backup).
Import Parameter 1 - Imports the
engineer parameters to a USB
device except serial number,
accumulated distance and time.
Import Parameter 2 - Imports the
engineer parameters to a USB
device.
Service 8
WiFi Function
Automatically detects and
displays WiFi Module status and
AP connected status and WiFi
MAC IP address.