Matrix 2016 3x console, Руководство по обслуживанию

Страница: 52 / 63

50
10.3 c3x Mye TV bRAcKeT InsTAllATIon - conTInUeD
17) Secure the MYE TV on the TV bracket with 4 screws (Figure S).
18) Install the TV back cover onto the MYE TV and secure it with 4 screws (Figure T).
19) Connect the TV control wire, TV power extended wire and other wires to the console (Figure U).
20) Install the console back onto the console mast and secure it with 5 screws (Figure V). NOTE: Make sure to tuck all the wiring into the
console or mast to prevent any pinching.
.
21) Enter into Manager Mode (see Section 5.1), and set the Input Source setting to TV (Figure W ~ X).
22) The new TV should now be programmed and thoroughly tested including the headphone jack (see the TV owner's manual for Channel
Scan instructions).
fIgURe x fIgURe W
fIgURe T fIgURe s
fIgURe V fIgURe U
cHAPTeR 10: sPecIfIcATIons AnD AsseMbly gUIDe