Matrix 2016 3x console, Руководство по обслуживанию

Страница: 36 / 63

34
9.3 TesTIng THe UnIT
cHAPTeR 9: PARTs RePlAceMenT gUIDe
once THe UnIT oR RePlAceMenT PART Is fUlly InsTAlleD AnD AsseMbleD AnD
PRoPeRly PlAceD on THe flooR, Use THe folloWIng InsTRUcTIons To seTUP
AnD TesT THe MAcHIne:
--for H/U/R/e/s/A3x-c
1) Enter Manager Mode and input the serial number of the console and frame. Also set the Machine Type and verify that the Date and Time
are correct.
2) If the unit has an add on TV, program the channels (see Entertainment Owner's Manual).
3) Without hitting start or entering any program modes, step on the pedals and hold the handlebars while initiating movement to simulate
exercising. While moving, listen for any odd noises or squeaks.
4) After stopping movement, press the green GO key and begin pedaling.
5) Grasp the hand grips to check for proper heart rate response.
6) Press the level up and down buttons on the console and hand grips to make sure resistance is fully functional.
7) If everything functions properly, stop pedaling and the unit will reset to normal operation within 30 seconds.
--for c3x-c
1) To enter Manager Mode, press number key "ENTER, 1, 0, 0, 1, ENTER" on the number keypad. Input the serial number of the console. Also
set the Machine Type and verify that the Date and Time are correct.
2) Press the green GO key and begin using the machine. Stand on the machine and hold the handlebars while initiating movement to simulate
exercising. While moving listen for any odd noises or squeaks.
3) Grasp the hand grips to check for proper heart rate response.
4) Press the LEVEL UP and DOWN keys on the console to make sure resistance is fully functional.
5) Try stepping off the unit to make sure the proximity sensor is fully functional. Also test the STOP key on the grips, IR sensor for function.