Matrix 2016 3x console, Руководство по обслуживанию

Страница: 39 / 63

37
10.1 WIfI InsTAllATIon - conTInUeD
2. How to set up the “WIfI” function
NOTE: There are two metholds WIFI function installation (see A and B).
A. Set up 3X console WIFI function by USB
1). Create a WiFi config file
Step 1: Use your computer and use "note" function to create a wifi config file ( the name is called 'wifi_set.cfg’ ).
. Step 2: Check your AP data and and modifying SSID & Key (password) required by facility Access Point (AP) to 'wifi_set.cfg' files. Once this
is completed, put the 'wifi_set.cfg' file to USB flash drive (the access should read \MATRIX\FW\ - Figure B).
2). Install WiFi config software for wifi connection.
Step 1: Insert USB driver with ‘wifi_set.cfg’ file to console (Figure C).
Step 2: Enter Manager Mode by pressing ‘enter, 1, 0, 0, 1, enter’.
Step 3: Press the Level UP and DOWN keys to select “Internet” and press Enter Key to enter (Figure D).
Step 4: Pres Enter key to enter Enable/Disable setup (Figure E).
Step 5: Use the Level UP and DOWN keys to select "Enable" (Figure F).
fIgURe b fIgURe A
fIgURe D fIgURe c
fIgURe f fIgURe e
cHAPTeR 10: sPecIfIcATIons AnD AsseMbly gUIDe