Matrix 2016 3x console, Руководство по обслуживанию

Страница: 45 / 63

43
10.2 HUResA3x Mye TV bRAcKeT InsTAllATIon
follow the instructions below to install the TV and bracket. Use the instructions in the entertainment
owner's Manual to program the TV after installation.
1) Remove the console as outlined in Section 9.1.
2) Remove the 6 screws holding on the back cover of the console and remove it (Figure A).
3) Remove the 2 screws holding the front of the console to the back and split the 2 halves (Figure B).
4) Unplug the entertainment keypad ribbon cable from small board and remove the front service cover (Figures C & D).
5) Use new front service cover with earphone board, and plug the head phone jack wire into earphone board. Also plug entertainment keypad
ribbon cable into the small board (Figures E).
6) Plug the TV power wire into the UCB (Figure F).
fIgURe b fIgURe A
fIgURe D
fIgURe c
fIgURe f
fIgURe e
cHAPTeR 10: sPecIfIcATIons AnD AsseMbly gUIDe