Matica Technologies Espresso II, Руководство пользователя

Страница: 45 / 53

6-4 User Guide
Configuration
To print using the Magnetic Encoder, enable these modules on the printer so that the printer driver can use
them correctly.
1) Set the Coercitivity values from High, Low.
2) Set the " Standard " encoding preferences. With this drop down menu is possible to set which standard
to use for encoding the cards. These are the possible choices: ISO (Default) - ISO 7811 Standard or JIS-
2 - Japanese JISB9561-1979 Standard.
3) Tracks (ISO Standard), With these commands, for every single track, is possible enable / disable the
track and make the ISO Standard choice.
Track 1, Track2, Track 3: with the selection boxes is possible enable/disable the tracks, with the drop
down box is possible choose the standard ISO. The possible choices of Standard ISO in the drop down
menu are:
Standard Track 1 Track 2 Track 3
ISO1 DEFAULT
ISO2 DEFAULT
ISO3 DEFAULT
Tracks (JIS-2 Standard) : If the JIS-2 standard is choose appear only the track 1 and in the drop down
menu is possible only chose the JIS-2 standard. The possible choices of JIS-2 standard in the drop
down menu are:
Standard Track 1
JIS-2 DEFAULT
4) Mag strip start/end sentinels: with these command is possible to set the “Special Character Strings”
used for the in-line magnetic encoding. These special characters are placed at the beginning and end of
the characters that we want to write in the magnetic fields, for more details please refer to the rule
ISO7811. Every Start and end sentinel must have the possibility to manage until of 3 characters each. In
the drop down menu there are two type of choices:

Default: the strip start/end sentinels Characters are the Standard DCP and they are not editable.

Personalized: the strip start/end sentinels Characters are editable by the user.
In the "begin" and "end" boxes is possible display or set the specials characters. Every row correspond
to a track. For each track, you can use up to a maximum of three characters, always followed by the
track number as follows:
track 1: start= -%1 end=?
track 2: start= -%2 end=?
track 3: start= -%3 end=?
2
1
3
4