1
P: 1800 281 282
|
F: 1300 281 282
|
|
W: www.matelecaustralia.com.au
QUICK START GUIDE
Introduction
The HydroWHIZ Controller has been designed with ease of use at the core of the system design. Building on the wealth of the pump
control features in the Advanced controller, the HydroWHIZ brings these features into a new age with a color touch screen interface
and a streamlined setup process. In a world where information is power the HydroWHIZ has extensive time and date stamped
alarms, logged data, trend graphs and diagnostic pages to provide the user with all the information required for optimisation and
preventative maintenance. Featuring the flexibility of level, pressure and temperature system modes with a wide range of functions
and protections, the HydroWHIZ VSD controller is ideal for a wide range of applications including water transfer, stormwater and
sewage pump out, constant pressure, hot water circulation and chiller supply, to name a few.
For more information on the operation of the HydroWHIZ VSD controller see the HydroWHIZ VSD Operation Manual.
V1.7
HydroWHIZ Pump Controllers
VSD
Safety
This control panel has been designed and built for applications that are Commercial and/or Industrial in nature, operation, function
and location. If the control panel is to be used in Domestic/Residential applications, where specific Wiring Rules in respect of ‘electrical
supply’ protection may apply, it is the responsibility of the installing electrician to ensure compliance with relevant standards.
•
Prior to installation, ensure power supply is isolated.
•
Power supply must be circuit breaker protected (qualified electrician to determine appropriate amp rating).
•
It is highly recommended that RCDs are NOT used to protect the supply to this panel. The VSDs in this panel have EMC filtering
which can cause nuisance tripping of RCDs. It is recommended to use alternative protection for the incoming cables. If RCDs
are required, type B RCDs must be used, taking into consideration the VSD earth leakage current to avoid nuisance tripping.
•
Electrical connection to the panel must be carried out in accordance with the following pages.
•
Additions or modifications to the control panel are not permitted and will void warranty.
•
The controller is not intended for use by children or infirm persons without supervision.
•
Repairs to the controller must only be carried out by a suitably qualified electrician.
This manual makes use of the following symbols to indicate warnings that must be paid specific attention to:
Damage to equipment or personal harm may occur if this instruction is not followed
Electrical risk (electrocution hazard) may occur if this instruction is not followed
Single Phase - FPC-63X21 (1-6 Pumps)
Three Phase - FPC-63X20 (1-6 Pumps)
