page 5
4.3
Closing of Wok burner
If the Wok burner is to be cut off temporary, the gas valve handle “B“ is to be turned clockwise to position
OFF. The burner remains operable.
For longer periods of closing and in the evening, the gas valve handle “B“ has to be placed clockwise to
position OFF and the pilot gas valve switch “C“ closed.
4.4
Operation Combi Wok burner (Soup burner)
Press security control knob “E“ and place anti clockwise in ignition position
*
.
Leave knob pressed in and ignite with ignition pistol the pilot flame. After the pilot flame burns, the knob must
remain pressed in for 15-20 seconds. If after releasing knob the pilot flame continues burning, the appliance
is operable. If the pilot flame goes out, you have to repeat the ignition process.
Turn the knob anti clockwise to the desired position between full combustion and small combustion.
4.5
Cut off Combi Wok burner (Soup burner)
If the Combi Wok burner should be cut off temporary, place security control knob clockwise to ignition
position *, the burner remains operative.
For longer periods of cut off and in the evening, place knob to position “O“.
5.
Important Notice
The appliance is for commercial use and should be operated by qualified staff.
During operation the appliance must be attended.
It is necessary to have the appliance checked at regular intervals.
The time of checking depends on the use.
The checking must take place at least once a year.
On the Wok burner it is not alllowed to use pots with flat bottoms.
During full combustion without Wok pots on it, the flame extends over the Wok ring. During full combustion
with Wok pots on it, the flame extends to the side. In both cases burns to the staff are possible when
careless.
In case of problems, the appliance must be cut off. The main gas cock must be closed and the service
engineer is to be called.
An eventual change of the gas type may only be carried out by the producer or ist service agent.
5.1
ATTENTION – EXPLOSION RISK !!!!
It is strictly
forbitten
to cover the burners or drawers below or the air holes on the side walls, with Alu or
silver foil or similar materials.
This causes a wrong air circulation and gas combustion and
overheats
extremly the entire appliance and the
function of the burners.
