Mastervolt Digital DC 10x10A, Руководство пользователя

Страница: 9 / 28

MASTERBUS FUNCTIONS
EN / Digital DC 10x10A / October 2010
9
5 MASTERBUS FUNCTIONS
5.1 MASTERBUS MENUS
This chapter describes the MasterBus functions
available with the Digital DC. Where mentioned, X ranges from 1 to 10 referring to
a specific channel. 10 channels are available.
Menu Description Default Range
Monitoring
Device state State of the Digital DC. One state is alarm. See alarms for
more information.
On On,Stand by,Alarm,
Disabled
Channels X Switch On/ Off a specific channel of the unit. Last means the
channel will retain its state before the Digital DC was
switched Off. On On, Off, Last
Reset all
alarms Reset MasterBus alarms in all channels.
Alarms
Alarm status
X Alarm state of channel X. Overload means a current is drawn
that exceeds the software fuse setting. Hardware fuse : the
fuse in channel X has blown or the channel voltage is too
low.
Minimum current : A current below the minimum current
set is detected.
No alarms No alarms,
Overload,
Hardware fuse,
Minimum current,
System temperature alarm state.
Temperature high : temperature warning, Temperature
critical : Device shut off due to overheating.
Tempera-
ture
normal Temperature
normal, high,
critical System
Battery Low means once the voltage of the supply battery
(bank) has dropped below 10V (20V) in a 12V (24V) system
for more than 30 seconds, an alarm will be raised. The alarm
stops as soon as the battery voltage is higher than 11 (22) V
in a 12 (24) V system for more than 30 seconds.
No alarms
No alarm, Battery
low
Configuration
Device
Language Language setting of the Digital DC. NOTE: the language of
the display may be different from this setting. English See Specifications
section 10.1.
Name Name of your Digital DC in the MasterBus system. If you
have more than one unit you should change names. DSD DC
Switching Any name with
maximum 12
characters.
Events
locked Check box to disable event configuration on the device.
Operable by installer only (log in required). Un-
checked Unchecked,
Checked
Logics
locked Check box to disable logic block configuration on the device.
Operable by installer only (log in required). Un-
checked Unchecked,
Checked
Low bat
alarm See Alarms (log in required for alarm adjustments). Disabled
Disabled, 12V, 24V
Factory
settings Option to reset the Digital DC to factory settings (log in
required).
System
MasterBus
power Option for setting the Digital DC to power other MasterBus
devices. On On, Off
Channel X X ranges 1 to 10
Config.
locked Option to lock configuration of this channel. Unlocked Unlocked, Locked
Mode Select the way channel X should act.
8 different modes are available,
Disabled being the simplest
and Manual the most sophisticated.
Conven-
tional See section 5.2