Mastervolt Digital DC 10x10A, Руководство пользователя

Страница: 2 / 28

QUICK REVIEW
2
October 2010 / Digital DC 10x10A / EN
QUICK REVIEW
The
Digital DC 10x10A is a MasterBus based input
and output module. It controls maximum 10 fused
DC channels with currents up to 10A or maximum
100A when the 10 channels are linked.
It provides the MasterBus network (see chapter 4)
with information about the state of the fuses and
devices. A MasterBus display enables you to view
this information, see section 3.3.
Input
MasterBus signal, generated by:
•
Digital Input;
•
Switch Input 3;
•
Switch Input 4;
•
MasterView Easy display;
•
PC with MasterBus USB interface;
•
Any other MasterBus device connected, via
MasterBus events.
•
Electric signal, generated by an electric On/Off
switch connected to the Digital DC directly.
Output
•
Electric current up to 10A with software fuse;
•
MasterBus output status signal;
MasterBus menus
•
Monitoring menu;
•
History menu to keep track of data;
•
Configuration menu to enter Digital DC 10x10A
settings;
•
Alarm menu which shows an Overload and No
Load situation of a channel and what fuse has
possibly blown;
•
Event menu
Read out device
For installing and adjusting the Digital DC a read out
device is necessary. For example:
•
MasterView Easy MkII;
•
MasterAdjust PC software (via USB interface)
Communication LED
The LED (figure 1, point 2) has 5 modes, see table.
LED Mode State Meaning
Off - No power available
One short blink every 10 sec Disabled DC available at input
Two short blinks every 10 sec Disabled One or more outputs have been set to Always on
One short blink every 1 sec Enabled ALARM
On continuously Enabled Normal use
The Digital DC 10x10A only functions when MasterBus configured!
Figure 1: Digital DC 10x10A
1. DC input
2. Communication LED
3. Functionality determined
by fuse positions
4. Channels for DC output
or signal input
5. MasterBus connectors