manualshive.com logo in svg

MasterCraft NXT20 2023, Руководство пользователя

Поделиться
Скачать
MasterCraft NXT20 2023 Скачать руководство пользователя страница 437

431 

/ 2023 OWNER’S MANUAL 

Spare Tire

All models support an optional spare tire. Mounted to the front of 
the trailer, this feature serves as a convenient and reliable back-up 
tire in the event that one needs to be replaced. Make sure you keep 
the spare tire inflated and check it periodically. The tire’s vin label 
should provide information on optimal pressure levels. For additional 
instructions, see the accompanying manual. 

Ramp-n-Clamp

As discussed earlier in this chapter, the MasterCraft Trailer supports 
an optional clamping tiedown for the bow. This optional feature, 
known as the Ramp-n-Clamp, simplifies the process of connecting 
the bow to the trailer. 

The Ramp-n-Clamp is preinstalled on the MasterCraft Trailer. To use 
the Ramp-n-Clamp, set it to the down position before backing the 
boat onto the trailer. This will allow the boat to easily catch on the 
device. When you are ready to release the boat from the trailer, move 
the Ramp-n-Clamp to the up position. At any time, use the crank 
to fasten or loosen the strap as needed. For additional information 
regarding the Ramp-n-Clamp feature, refer to the “Safety Cables” 
section of this chapter. 

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды