manualshive.com logo in svg

MasterCraft NXT20 2023, Руководство пользователя, Страница: 223 / 490

Поделиться
Скачать
MasterCraft NXT20 2023 Скачать руководство пользователя страница 223

217 

/ 2023 OWNER’S MANUAL 

the automatic discharge. Boats are equipped with a discharge 
indication light at the instrument panel or on the video display 
gauge at the helm.

 

 

Following the activation of the automatic fire suppression system 

or a hand-held fire extinguisher, a careful determination should be 

made as to whether the boat can safely be operated. If there is any 

doubt or concern whatsoever, the boat should be towed to shore 

and/or dock for service by an authorized MasterCraft dealer prior 

to operating again. Failure to follow these instructions could result 

in death or serious injury/illness.

Troubleshooting

•  If there is evidence of fire in the engine compartment of a 

V-drive boat and the automatic fire suppression system does 

not activate, pull the manual override (on domestic boats only). 

The override location is illustrated in the Guide to Individual 

Models of this Owner’s Manual. Boat owners should also 

confirm this location with the assistance of an authorized 

MasterCraft dealer.

•  If the manual override does not deploy, ensure all persons on-

board are equipped with PFDs (personal flotation devices). If 

there is time, send visual and sound signals of the emergency. 

All persons should abandon ship and move to a safer location. 

Boats can be consumed by fire and even explode if there are 

fuel fumes. If a fire begins in another location other than the 

Location

Automatic Fire Extinguishers:  

All automatic fire extinguishers 

are located in the engine compartments on all boats. The locations 
of automatic fire suppression override units’ manual override 
varies by model, but generally is in the vicinity of the helm. 

Manual Fire Extinguishers:  

Manual fire extinguishers have 

various locations within the boat, but are generally located 
under either the observer seat or in the head and all are easily 
accessible. Be certain to determine the location of all fire 
suppression and extinguishing units on the boat. Your authorized 
MasterCraft dealer can assist you.

Operation

Automatic Fire Extinguisher

 Manual Override:  It is possible to 

manually override the HFC-227 fire extinguishing system on all 
non-CE packaged boats. Pull the pin from the red handle labeled 
FIRE near the helm seat. Pull up on the FIRE handle to deploy  
the system. 

Manual Fire Extinguishers:  

Pull the pin and squeeze the trigger.

Special Attention

In case of an engine compartment fire, shut down the engine 
and blowers before manual discharge, or immediately following 

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов