manualshive.com logo in svg

MasterCraft NXT20 2023, Руководство пользователя

Поделиться
Скачать
MasterCraft NXT20 2023 Скачать руководство пользователя страница 432

2023 OWNER’S MANUAL / 

426

MasterCraft offers the Ramp-N-Clamp system to simplify loading 
and launching the boat from the trailer. To operate:

1.  Set the Ramp-N-Clamp handle to the down position so it can catch 

the boat when loading onto the trailer.

2.  Lift the Ramp-N-Clamp handle to the up position to release boat 

from the trailer.

3.  Do not lift the Ramp-N-Clamp handle until you are ready to release 

boat from the trailer.

Helpful Tips

For easier release on the ramp, put the boat in forward gear or 
keep the winch strap tight while lifting the Ramp-N-Clamp handle.

Keeping the Ramp-N-Clamp cover and front of the boat waxed is 
part of the proper, regular maintenance.

If the boat rocks back and forth on the trailer while towing, raise 
the winch post uprights or add tie down straps to the trailer to 
prevent rocking. An ill-fitting trailer will cause wear that is not 
covered under the warranty.

A winch strap must be used and firmly tight while towing.  
This prevents wear to the bow eye that is not covered under 
warranty. Also, it is very important to be sure that the transom of 
the MasterCraft boat is resting fully and securely on the supports 
provided at the rear end of the trailer, and that it remains in place 
when the trailer is parked or underway.

 

Failure to engage the locking pin may result in the collapse of the 

jack stand, which could cause serious injury or death. 

Always be certain that the feet of individuals operating the trailer 

jack or in the vicinity of the trailer jack are clear when the jack 

is lowered into position. A considerable amount of the trailer’s 

weight, and that of the boat when it is aboard the trailer, can be 

transferred through the trailer jack. This could cause very painful 

injuries if feet are not clear of the jack when it is lowered. Be 

certain that fingers and hands are clear when moving the trailer 

jack because they can be pinched in the mechanism, again 

resulting in injury.

Tie Downs

Ensuring that a MasterCraft 
boat will be held securely 
in place on the trailer’s hull 
support (bunks), especially 
when towing, is extremely 
important. If the boat is not 
firmly and properly secured, 
the boat can be damaged as it 
bounces against the  
hull supports.

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды