MasterCraft NXT20 2023 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 490

MasterCraft NXT20 2023 Скачать руководство пользователя страница 126

2023 OWNER’S MANUAL /

120

Depth / Position Settings

The Position Format selection displays positions on the map in the
following three GPS formats:

• Degrees, Minutes and Decimal Minutes (i.e., 79°58.93172W)
• Degrees, Minutes, Seconds and Decimal Seconds (i.e.,

40°20’50.93172)

• Degrees and Decimal Degrees (i.e., 79.982195)

Depth Contour

The Depth Contour setting allows an alarm to be displayed when
the boat is detecting a water depth at or above the depth selected.
The map will display depths within the lines as shown below.
Choose a Depth Contour to be displayed by touching a preferred
depth:

•  Off
•  6 feet
•  16 feet
•  33 feet
•  66 feet

Safety Contour

The Safety Contour will change the map’s display color in areas of
water that are at or deeper than the selected depth. These depths
will be blue while depths shallower than the selected depth will
be white. Choose a Depth Contour to be displayed by touching a
preferred depth:

•  Off
•  6 feet
•  16 feet
•  33 feet
•  66 feet

«
...
124
125
126
127
128
...
»

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов