MasterCraft NXT20 2023 Скачать руководство пользователя страница 195 | Manualshive

Страница: 195 / 490

MasterCraft NXT20 2023 Скачать руководство пользователя страница 195

189

/ 2023 OWNER’S MANUAL

CARE AND MAINTENANCE

Only basic cleaning should be required to maintain the 4.5” video
touch screen at its best. A soft cloth can be used for cleaning the
units. Typical window cleaner or rubbing alcohol can also be used
to clean the glass portion of the video screen display. Do not use
harsh or abrasive cleaners on the unit.

Avoid contact between sharp or hard objects and the video touch

screen because this can result in scratches or other permanent

marks on the screen. Clean only with a soft cloth, using window

cleaner or rubbing alcohol only. Never use harsh or abrasive

cleaners on the unit, as this may result in damage to the unit that

is not covered under warranty.

DISPLAY KEYS AND MENU BAR

Navigate by pressing the Display Keys. The Menu Bar changes
according to the screen displayed. To navigate to a feature, press
the Display Key under your desired feature or action. Display Keys
Features And Actions

PRODUCT INFORMATION

Cruise Control

•  ON or OFF
•  Set Speed MPH
•  Actual Speed MPH
•  NXT Wake Shaping Devices

Position (Optional)

• Attitude Adjustment Plate

Position (Optional)

Status

•  Oil Pressure
•  Engine Temperature
•  Engine Hours
•  Voltmeter

The NXT integrates instrumentation
and control. The video display is a
multi-functional tool that enables the
boat operator to view many different
display settings, engine parameters,
and service codes.

Display Keys

Display Menu Bar

•  Gauges
•  Fuel
•  MPH
•  RPM
•  Air Temperature
•  Water

Temperature

(Optional)

• Water Depth

(Optional)

«
...
193
194
195
196
197
...
»

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов