manualshive.com logo in svg

MasterCraft NXT20 2023, Руководство пользователя

Поделиться
Скачать
MasterCraft NXT20 2023 Скачать руководство пользователя страница 268

2023 OWNER’S MANUAL / 

262

•  Fold tower back and rest it on the motor box (or the tower 

stands included with the boat to protect upholstery). Some 

padding is advised to protect adjacent surfaces. 

If Removing, Follow These Additional Steps:

•  Pull excess wires out from under the deck.
•  Disconnect the light wires. Note: On the tower side, fold the 

wires and push them up into the tube. On the deck side, fold/

loop the wires up and stuff them back into the access hole.

 

Do not plug the wires together. This will act as a direct short 

if the light switch is turned on, resulting in a tripped circuit 

breaker. 

•  Looping the wires up so they create pressure against the 

deck/hole will provide additional resistance to help prevent 

them from falling down.

•  Do no If this happens, the side access panel will have to be 

removed to re-route them through the access hole.

•  Ensuring the wires are clear, stand the tower all the way back 

up to its normal operating position.

•  From the back side of the tower, push the base of the tower  

leg forward. 

•  It should easily slide about 1/2” before catching on a small, 

raised feature intended to keep the tower from sliding out 

too easily and the operator losing control of it.

 

Because Z towers are specifically designed and tested for our 

boats, MasterCraft discourages installation of after-market 

towers. After-market towers may lead to damages and will most 

likely void the warranty. We urge owners to buy towers and related 

accessories from an authorized MasterCraft dealer.

Operation

Each MasterCraft tower has a unique operation method. The Z6 is 
operated using a lock-pin mechanism, while the Z8 and Z10 utilize 
hydraulic support. For detailed instructions on how to use a specific 
model, refer to its respective section in this manual. 

Raising and Lowering the ProStar Tower

Lowering (and Leaving the Tower Attached):

•  While applying some upward/forward pressure on the tower 

header, disengage one of the hand knobs.

•  Repeat for the other side (or a second person can do this 

simultaneously). Note: Typically, it is easier to disengage both 

sides first compared to completely removing one knob and then 

disengaging and removing the second. The angled thread on the 

knobs can put the tower/threads in a bind. 

•  Completely unscrew the hand knobs until they are disengaged  

(a spring pushes them out).

Содержание NXT20 2023











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды