CLKTCD12 User Manual
13
© Masterclock
®
, Inc 2006-2007.
Rev 1.2.0 May ‘07
http://www.masterclock.com
[Note: The CLKTCD12 will accept switch changes
dynamically.
It is not necessary
to restart or cycle the power of the CLKTCD12 for the device to accept the new
settings]
[Note: Once the clock has been configured with the
CLKTCD-Set
software, the
switch settings will be over-ridden; and the unit will ignore all switch settings unless
a RESET Factory Default is performed.]
Default Configuration
The CLKTCD12 ships from the factory with all S1 switches in the OFF position. This
default configuration results in the time displayed as:
Time zone offset:
None
Daylight Saving Time:
Disabled
Time Code Date Encoding Disabled
Reset Factory-Default Configuration
In some situations it may be necessary to return the CLKTCD12 to its factory default
configuration. A RESET to factory configuration is accomplished by pressing
button combination (B1 and B3) simultaneously. These buttons are located on the
electronics cover on the rear of the CLKTCD12 network clock chassis. Buttons B1,
B2 and B3 are also used to calibrate the hands of the clock.
To reset configuration to factory default –
1. Remove AC or DC power from the device,
2. Depress and hold both button
B1
[
CW/Forward
] and button
B3
[
Trim/Forward
] button simultaneously.
3. Apply power to CLKTCD12 and continue holding the reset button
combination down for 5 seconds.
4. The time code clock configuration will now be reset, and the unit will default
to using the current switch positions. If special configuration was applied via
the software configuration tool, then the unit will need to be reconfigured.
Содержание CLKTCD12
Страница 26: ...CLKTCD12 User Manual 23 Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Страница 37: ...CLKTCD12 User Manual b Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Страница 38: ...CLKTCD12 User Manual c Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Страница 39: ...CLKTCD12 User Manual d Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...