Master R-14, Руководство пользователя

Страница: 44 / 69

44
EN
Please ensure that you read this manual carefully before attempting to assemble or
use your new product and retain for future use.
Tools
If required, most of our products are supplied with basic tools, which will enable you to
successfully assemble your product. However, you may find it beneficial to have a soft-headed
hammer and perhaps an adjustable spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in a clean, clear, uncluttered area. This will
enable you to move around the product while you are fitting components and will reduce the
possibility of injury during assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble this product with the help of a friend as
some of the components may be large, heavy or awkward to handle alone.
Open the Carton.
Carefully open the carton that contains your product, taking note of the warnings printed on the
carton to ensure that the risk of injury is reduced. Be aware of sharp staples that may be used
to fasten the flaps as these may cause injury. Be sure to open the carton the right way up, as
this will be the easiest and safest way to remove all the components.
Unpack the Components
Carefully unpack each component, checking against the parts list that you have all the
necessary parts to complete the assembly of your product.
Please note that some of the parts may be pre-fitted to major components, so please check
carefully before contacting our CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before contacting us first.
Important Safety Instructions
Before you undertake any programme of exercise that will increase cardiovascular activity please be sure to
consult with your doctor. Frequent strenuous exercise should be approved by your doctor and proper use of your
product is essential. Please read this manual carefully before commencing assembly of your product or starting to
exercise.
•
This exerciser is made for home use or semi commercial use only, and tested up to a max body weight of
120kg.
•
Follow the steps of the assembly instructions carefully.
•
Use only original parts as delivered.
•
Place this exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of any
exerciser in moist areas is not recommended.
•
Before assemble it, check if delivery is complete by using the included parts-list.
•
For assembly use only suitable tools and ask for assistance with assembly if necessary.
•
Check before the first training and every 1-2 month that all connecting elements are tight fitting and are in
the correct condition
•
Replace defective components immediately and/or keep it out of use until repair.
•
For repairs, use only original spare parts.
•
In case of repair please ask your dealer for advice.
•
Ensure that training starts only after correct assembly and inspection.
•
For all adjustable parts be aware of the maximum positions to which they can be adjusted/tightened to.