Master MAS-HM6022, Руководство пользователя

Страница: 61 / 76

61
EN
Assembly Instructions
Step 1
1. Fasten front stabilizer (2) & rear stabilizer (3) to main
frame (1). Secure with 4 sets of carriage bolt (50) &
washers (51) from the underside of stabilizers.
Step 2
1. Unscrew 2 bolts (52), 2 bolts (90), 2 nuts (69) & 4
washers (55) from main frame (1).
2. Connect upper computer cable (12) with lower
computer cable (13) securely
3. Put handlebar post (4) into main frame (1). Fix it with
2 bolts (52), 2 bolts (90), 2 nuts (69) & 4 washers (55)
again.
Step 3
1. Place fix post (5) to metal parts (under computer (15)
bracket) onto handlebar post (4) and secure with 1
bolt (85) each side tightly.
2. Connect upper hand pulse sensor wire (17) with
lower hand pulse sensor wire (18) both sides. Hide
the connection into fix post (5).
3. Fasten fix post (5) to handlebar post (4) with 1
bolt (85) each side firmly.
4. Cover end of fix post (5) with plastic cover set (upper
and lower) (30) each side. Secure with 1
bolt (57) (upside and underside) each side firmly.
Step 4
1. Plug upper computer cable (12) to cable at back of
computer (11). Plug lower hand pulse sensor
wire (18) to cable at back of computer (11).
2. Attach computer (11) onto bracket at top of
handlebar post (4) and secure with 4 bolts (58) firmly.
Step 5
1. Attach right upper swing bar (6) to axle of handlebar
post (4) and secure with 1 set of cap (33),
washer (53), bolt (54) & cover (32) in order.
2. Do the same to left upper swing bar (6).