Master Power GreenE 3.68K, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 46

56
Power factor setting
Reactive Power
2. Grid-connected power
3. Volt Max
Press UP/DOWN to increase or decrease the input figure.
Press ENTER button to confirm or ESC button to cancel the
input and return to working interface.
The input value should range between L0.80 and L0.99 or
C0.8 and C1.00.
Interface Description
-POWER FACTOR-
INPUT:
C1.00
Value range
(L1.00 ~ C1.00)
Press UP/DOWN button to adjust the input figure.
Press ENTER button to confirm or ESC button to cancel the
input and return to working interface.
The input value should range between -60% and +60%,
which varies with the standard.
Interface Description
-REACT POWER-
INPUT:
+60%
Value range
(-60%~+60%)
Press UP/DOWN button to adjust the input figure.
Press ENTER button to confirm or ESC button to cancel the
input and return to operation parameters interface.
The input value should range between 0 and 100.
Interface Description
-GRID PERCENT-
INPUT:
100%
Value range
(0 ~ 100)
Enter option 1 to adjust the maximum volt of the INV.
Enter option 2 to adjust the maximum volt of the grid.
Interface Description
-VOLT MAX-
1: INV MAX
2: GRID MAX
User Manual
57
High INV voltage
GRID VOLT MAX
Volt Min
Low INV voltage
INV Over Voltage Protection Point
Press UP/DOWN to adjust the input figure.
Press Enter to confirm the input and enter restart interface;
Press ESC to cancel the input and return to operation
parameters interface.
The value should range between 240V and 280V, which
varies with different standards.
Interface Description
-INV VOLT HIGH-
INPUT:
UNIT:
V
Value range
(240 ~ 280V)
GRID Over Voltage Protection Point
Press UP/DOWN to adjust the input figure.
Press Enter to confirm the input.
Interface Description
-GRID MAX-
INPUT:
270V
Enter option 1 to adjust the minimum volt of the INV.
Enter option 2 to adjust the minimum volt of the grid.
Interface Description
-VOLT MIN-
1: VAC-MIN
2: GRID MIN
INV Low Voltage Protection Point
Press UP/DOWN button to adjust the input figure.
Press Enter to confirm the input and enter restart interface;
Press ESC button to cancel the input and return to
operation parameters interface.
The value should range between 150V and 220V, which
varies with different standards.
Interface Description
-INV VOLT LOW-
INPUT:
UNIT:
V
Value range
(150 ~ 200V)
User Manual