5.
6.
7.
8.
LCD display
“ V
Hz” jack
This is positive input terminal for volt,
resistance, diode, capacitance frequency,
ADP and Continuity test. Connection is
made to it using the red test lead.
“COM” jack
This is negative (ground) input terminal for
all measurements except current.
Connection is made to it using the black
test lead.
RANGE button
Press this button to select auto and manual
range. When a function with auto and
manual mode is selected, the meter enters
6
9.
10.
11.
autorange at first. To change to manual
range, push this button once.
When the meter operates in manual ranging
mode, push this button to change range to
the higher one and hold this button for more
than 3 seconds to return to auto range mode
FUNC. button
In
range, press this button to select
or or
function. Different symbol of
function will appear on the LCD.
button
Press the button is used to turn the backlight
on. Press the button again is used to turn the
backlight off. To turn the backlight on again,
just press it once more.
When measuring current, press the button
the radius lamp near the clamp is lighted at
one time.
Rigger
Press the lever to open the transformer.
When the lever is released, the jaws will
close again.
7
