MAINTENANCE
●
●
●
●
●
Never touch exposed wiring, connections or
any live circuit when attempting to take
measurements.
Before opening the case, always disconnect
test leads from all energized circuits.
Never use the meter unless the back cover
is in place and fastened completely.
Do not use abrasives or solvents on the
meter. To clean it using a damp cloth and
mild detergent only.
Qualified and trained service technicians
should only perform calibration and repair of
the meter.
GENERAL DESCRIPTION
The meter is an autorange professional clamp
meter with 5999 counts. For measuring DC and AC
voltage, AC current, Resistance, Capacitance,
Frequency, ADP, Diode, and Continuity Test with
battery operated.
There is the AC measurement to be RMS or TRUE
RMS about the meter. It is chosen as user buy.
4
Otherwise, there is a radius lamp near the clamp, It
is lighted in measuring current.
PANEL DESCRIPTION
1.
2.
3.
Transformer jaws
Pick up the AC current flowing through the
conductor.
Rotary switch
Rotary switch is used to select functions.
HOLD button
When this button is pushed, the display will
keep
the last reading and “
”
symbol will
appear on the LCD. Pushing it again returns
the meter to normal mode.
4.
MAX/MIN button
Press the button to enter the
MAX/MIN
Recording Hold mode. The maximum,
minimum values are then reset to the
present input. The readings are stored in
memory. “
MAX
”
or
“
MIN
”
annunciator
turns on to indicate what value is being
displayed. Hold this button for more than 3
seconds to return to the normal operating
mode.
5
