MASSOTH ELEKTRONIK UND
ELEKTROMECHANIK GMBH
Versionsübersicht von eMotion-Produkten / Version overview of eMotion products
eMotion LS + XLS + XLS-P (Misc. item numbers)
Version revision / changes
date
1.0
1.series for Steam / Diesel / E-loco
12/15/06
1.1
Fast program start cause of programming error on misc. central stations
01/09/07
1.2
Bug fixing wheel sensor, enlarged standing-phase for Diesel-locos
Volume startup-signal, contact triggering on depending of direction
02/23/07
XLS
Plugs changed
04/30/07
1.3
Bug fixing "Break on DC , better E-loco driving sound
Single volume setup of driving sounds
06/13/07
1.4
Better brake triggering, added drive position switch E-loco,
Bus connector for load-dependent smoke generator
08/15/07
XLS
Changed c-clamps and plugs
10/30/07
1.5
Time optimization for faster program flow
11/07/07
1.6
Bug fixing volume control, random sounds on drive
Bug fixing missing function command after start.
02/15/08
2.0
Completely new update software for fi sound
04/08/08
2.1
Improved update software, electronic brake on halt
05/05/08
2.2
Improved dimming function F1..4 , CV19 multiple unit address,
5-step multiple-contact switch programmable , P-update pantograph
10/06/08
2.3
Servo function on Output-6 , fast serial pulses for "P-Updates"
Automatic detection of volume regulator in analog mode ,
Longer timebase for random generator
02/12/09
2.4
Servo function on Output-7 (moved from Out-6 to Out-7).
Optimized Back-EMF control.
03/30/09
2.5
CV63 new CV for Back-EMF control, Optimized Back-EMF control,
CV170 function key Ballenberg
11/27/09
2.6
Changed software for shift gearbox. Software SUSI-interface
10/08/10
2.61
Recognize poti in analog operation
11/24/10
2.62
CV 150 (Starting inhibit between starting phase) works now with diesel
locos
CV read and program of high Cvs via SUSI
Unmeant starting phase if F5 off.
12/09/10
The decoder could be programmed by oneself to the newest firmware release.
Delivery of LS started on version 2.1
SEITE / PAGE 2 / 2