Massimo MSU 600, Руководство пользователя

Страница: 59 / 103

52
Cooling system
Correctly fill up the coolant and release the air inside (500/600cc):
1. Under the situation of whole empty
As showed in the picture, pull out the small circulating pipe
on the temperature adjusting set. Full up the coolant from the intake
of radiator. Connect back the pipe when coolant overflew.
Continue filling up untill the coolant is full. Cap the radiator,
Tighten the hoop of the pipe.
2.Add more coolant.
If only a little coolant needed, fill up from the intake of
radiator till it is full, and then cap the radiator.
3.Method of release the air.
If the engine is still overheat when the radiator is full, also the
water pump, Temperature Adjusting Set (TAS), fan is working
properly. So it might be some air in pipe.
The method of releasing the air is: pull out the small circulating pipe, keep adding coolant
from intake of radiator. Connect back the pipe when the coolant spilled out from the pipe.
Then fill up the radiator till it is full. Cap the radiator and tighten the hoop on the pipe.